Quality Inspection for Powder Molding - Best China Insert Molding manufacturer – FCE Detail:
Engineering Expertise and Guidance
Engineering team will help you on optimize molding part design, GD&T check, material selection. 100% ensure the product with high production feasibility, quality, traceability
Simulation before Cutting Steel
For each projection, we will use mold-flow, Creo, Mastercam to simulate the injection molding process, machining process, drawing process to predict the issue before make physical samples
Precise Complex Product Manufacturing
We have the top brand manufacturing facilities in injection molding, CNC machining and sheet metal fabrication. Which allows complex, high precision requirement product design
In house process
Injection mold making, Injection molding and second process of pad printing, heat staking, hot stamping, assembly are all in house, so you will have much low cost and reliable development lead time
Insert Molding
Insert molding is an injection molding process that utilizes encapsulation of a component in the plastic part. The process consists of two necessary steps.
Firstly, a finished component is inserted into the mold before the molding process actually takes place. Secondly, the molten plastic material is poured into the mold; it takes part’s shape and joints with the previously added part.
Insert molding can be performed with a wide variety of inserts, materials will be such as:
- Metal fasteners
- Tubes and studs
- Bearings
- Electrical components
- Labels, decorations, and other aesthetic elements
Material Selection
FCE will help you find best material according to the product requirement and application. There is a lot of choices in the market, we will also according the cost effective and supply chain stability to recommend the brand and grade of resins.
Molded part Finishes
Glossy | Semi-Glossy | Matte | Textured |
SPI-A0 | SPI-B1 | SPI-C1 | MT (Moldtech) |
SPI-A1 | SPI-B2 | SPI-C2 | VDI (Verein Deutscher Ingenieure) |
SPI-A2 | SPI-B3 | SPI-C3 | YS (Yick Sang) |
SPI-A3 |
Increases Design Flexibility
Insert molding allows designers and manufacturers to make virtually any type of shape or design that they desired
Reduces Assembly and Labor Costs
Combine several separate components into one injection molding, making more cost-effective. With insert molding being a one-step process, greatly reduce assembly steps and labor costs
Increases Reliability
Melted plastic flows freely around every insert before cooling and permanently setting, insert is firmly held in plastic
Reduces Size and Weight
Insert molding creates plastic parts that are much smaller and lighter in weight, despite being more functional and reliable than plastic parts made with other methods
Variety of Materials
Insert molding is a process that can use many different types of plastic resins, such as high performance thermoplastics
From Prototype to Production
Rapid Design Molds
Anticipated way for part design validation, low volume verification, steps for production
- No minimum quantities limited
- Lower cost design fitment checking
- Complicated design accepted
Production Tooling
Ideal for volume production parts, Tooling costs are higher than Rapid Design Molds, but allows for lower part pricing
- Up to 5M molding shots
- Multi-cavity tooling
- Automatic and monitoring
Typical Development Process
Quote with DFx
Check you requirement data and applications, provide scenarios quote with different suggestions. Simulation report with be provided in parallel
Review prototype (alternative)
Develop rapid tool (1~2wks) to mold prototype samples for design and molding process verification
Production mold development
You can kick off ramp up immediately with prototype tool. If the demand over millions, kick off production mold with multi-cavitation in parallel, which will take approx. 2~5weeks
Repeat Order
If you have focus for the demand, we can start delivery within 2days. No focus order, we can start partial shipment as few as 3days
Insert Molding FAQs
Insert molding application
- Knobs for appliances, controls and assemblies
- Encapsulated electronic devices and electrical components
- Threaded screws
- Encapsulated bushings, tubes, studs, and posted
- Medical devices and instruments
What’s The Difference Between Insert Molding & Overmolding
Insert molding is just one of the processes used to mold plastic around a non-plastic item.
In simple terms, the key difference is that the number of steps required to achieve the end result.
On the other hand, Insert molding does the same thing, but only in one step. The difference lies in the way the final product is made. Here, the insert and molten material are located into the mold to form the final combined product.
One more fundamental difference is that insert molding is not bounded by plastic, including metals with different products
Overmolding is usually utilized to produce products with great textures, shapes, and colors, predominantly made for shelf appeal. Insert molding is used to create more rigid products.
Product detail pictures:
Related Product Guide:
Our firm since its inception, normally regards item top quality as company life, constantly make improvements to generation technology, improve product excellent and repeatedly strengthen organization total good quality management, in strict accordance with the national standard ISO 9001:2000 for Quality Inspection for Powder Molding - Best China Insert Molding manufacturer – FCE , The product will supply to all over the world, such as: Wellington, Netherlands, Slovakia, We strongly believe that technology and service is our base today and quality will create our reliable walls of future. Only we've got better and better quality , could we achieve our customers and ourselves, too. Welcome customers all over the word to contact us for getting further business and reliable relationships. We have been always here working for your demands whenever you require.
By Leona from Argentina - 2018.06.12 16:22
This company has the idea of better quality, lower processing costs, prices are more reasonable, so they have competitive product quality and price, that's the main reason we chose to cooperate.
By Cora from Bolivia - 2017.11.20 15:58